Drive in Pallet Shelving Rack

Home » Products » Heavy Duty Pallet Rack » Drive in Pallet Shelving Rack
Drive in Pallet Shelving Rack

Drive in pallet shelving rack, a narrow aisle pallet racking, is used where high-density storage is required, with pallet stored in a block system. Frequently, it is used in facilities with a low number of product lines. The trucks drive into the racking to load or retrieve pallets, which are stored on cantilevered rails running throughout the system. The first pallet in is the last one out unless a drive-through system is used whereby pallets can be loaded or retrieved from either side of the block. Another arrangement for the pallets is first-in, first out. Drive in pallet shelving rack offers the ability to store a large amount of similar loads in a smaller area. Selectivity is sacrificed, but storage density is outstanding. Drive in pallet shelving rack can store up to 75% more pallets in the same space than selective racking -- depending on your application. It requires fewer aisles and is better cubic storage. In addition, due to poor bearing, this kind of rack can not support heavy cargo, therefore, every pallet weights less than 1000 kilograms.

Drive in pallet shelving rack allows a lift truck to enter the rack from one side to pick up or pull out pallets. This is done because pallets can slide backwards on a continuous rail. Forklifts drive into the rack to access pallets. You are limited in the depth of storage for a particular bay by the size of your facility. It is typically subject to more abuse than selective racks due to the way they are utilized, so rack integrity and strength are important factors. It is ideal rack for cooler or freezer applications.

As the truck enters the racking, special precautions apply to ensure the compatibility of design between the truck, pallet, load and the racking. Flat floors are advantageous. Usually the rack design incorporates a stability structure at the rear of the rack and therefore drive in indicates single access from one side.

The first picture is an enlarged drawing of goods placement. Goods are placed on the standard pallets and forklifts will drive into rack to access pallets. Consumers can customize this rack by themselves.

As an experienced drive in pallet shelving rack manufacturer based in China, Firebird Logistics Equipment offers a comprehensive range of products that includes bolted structural pallet rack, mezzanine shelving rack, bin shelving rack, work bench, and more.

Feedback Form
  • Mezzanine Shelving RackIt is mainly designed to the warehouse layout of manufacturers. Generally, there are two or three layers and the bottom rack is used to store pallets or goods and the second rack can store some parts and components or light but large-size goods. It is convenient to access goods. The realistic space utilization of this shelving rack is no so high but it is quite flexible. The second rack is not only used to store irregular goods, but also becomes a workshop such as the extended production lines of packaging. In addition, you can add some laminates such as mesh, board or steel shelf to deposit accessories and small pieces.
  • Push Back RackPush back rack, based on the first-in last-out principle, is a form of live storage with pallets being stored two, three or four deep. Pallets are loaded onto a trolley or carrier which pushes the other pallets back up a channel rail. When a pallet is removed from the system the remaining ones in that lane will roll forward.
    Push back rack, with high-cost and combination of rail and carrier, is extremely suitable for refrigeratory or other situation where need to add storing areas. And it is convenient to access pallets and has high space utilization. Due to the flowablity of carrier, pallets are accessed from one side only ...